PERT & PEX Floor Pipe Heating System , Laying Underfloor Heating Pipes ISO Standard

PE-RT Floor Pipe color according Specification dn16-32mm Standard: GB,DIN,JIS,BS

The PE-RT pipe inherits good flexibility, heat conductivity, chemical inertness from PE material. Meanwhile the design of special molecule and synthesis production enable it to be higher resistant to heat and pressure under the high temperature condition. It is suitable for home heating and most housing applications.

Main Features:

1. Good thermal stability and long-term pressure resistance

2. Flexibility and easy installation

3. Good impact strength and reliability

4. Connect by welding, easy to install and repair

5. Higher cost performance ratio

Application:

hot&cold water distribution, floor heating, residential or industrial plumbin

Brief Introduction of Products

Plastic material pipes are more and more important and popular in room heating, cooling and water service and sanitary distribution system. PE-RT means Temperature-Resistance Polyethylene. PE-RT pipe for heating floor is produced by Korean SK Corp, and recognized as an ideal floor heating product for its sanitary conditions, favorable standards, and good heat radiation. When the hot water pipes are circling under the floor, the heat will be dispersed through the floor.

It is widely use in hot & cold water distribution, floor heating system. residential or industrial plumbing.

Because high density polyethylene can not bear high temperature which results in its failing to solve indoor hot water supply problem. Therefore, polyethylene of raised temperature resistance (PE-RT) was developed in USA as a new kind of pipeline material able to bear the high temperature. Besides all the advantages of high density polyethylene, it’s well done in resolving problem of hot water supply. PE-RT is copolymer of comonomer based on ethylene-octane. It can control appropriately the number and distribution on the branched chain of polyethylene molecular chain during polymerization, which makes PE-RT material gain excellent physical mechanics performance and higher heat resistant performance without crosslinked. It can be used 50 years or so under the circumstance of transmitted water temperature 70°C(centigrade degree)& the pressure of 0.97MPa.

PE-RT physical mechanics performance:

PE-RT materials own excellent physical mechanics performance without crosslinked:

1. Good thermal stability & long-term resistance of pressure

2. Excellent resistance to environmental stress cracking performance

3. Good flexibility and toughness

4. Ability of low-temperature impact resistance

5. Excellent health performance

Advantages

Excellent thermal stability and long-term compression performance in heating,

Flexibility, easy construction, can be coiled and bended when operating,

Easy to operate,

Long time service

Specifications

1. material: PE-RT
2. Size(mm):16*2.0,20*2.0,25*2.3,32*2.9

3. Delivery time:15days

Advantages:

· High Temperature Resistance: the maximum sustained working temperature is up to 70 Degrees Celsius, the maximum transient temperature is up to 95 Degrees Celsius

· Heat Preservation: low thermal conductivity which is only 1/1500 of brass pipe, and 1/250 of steel pipe

· Non-toxic: no heavy metal additives, would not be covered with dirt or contaminated by bacterium

· Corrosion Resistant: resist chemical matters or electron chemical corrosion

· Lower Installation Costs: light weight and ease of installation can reduce installation costs by as much as 50% over metal piping system

· Higher Flow Capacity: smooth interior walls result in lower pressure loss and higher volume than metal pipes

· Long Life: more than 50 years under normal conditions

· Recycled and Environment-friendly

DSTHERM INDUSTRIAL LIMITED was founded in 2004, belongs to Seefine Group, wins good reputation through so many years hard works in the abroad markets, Dstherm becomes a famous brand among worldwide markets customers.

DSTHERM INDUSTRIAL LIMITED owned factories (ppr system and brass system) which focuses on manufacturing and exporting Ppr Pipe System and Brass products system.

Our main commodities cover:

Ppr Pipe system: Including Normal Ppr Pipe(20mm-160mm), PP-RCT Pipe(20mm-110mm), Ppr UV Pipe(20mm-110mm), Ppr Fiber Pipe(20mm-110mm), Ppr Composite Pipe(20mm-110mm), Ppr-Alu-Ppr(20mm-110mm) , Ppr Aluminum Composite Pipe(20mm-110mm),Ppr Perforated Aluminum Pipe(20mm-110mm), Ppr-Fiber-Ppr-UV Pipe(20mm-110mm), Ppr Nano-Antibacterial Pipe(20mm-110mm), Ppr Copper pipe(20mm-32mm)

Ppr Pipe fittings System: Including ABC three kinds of designs,full range of fittings from sizes 20mm to 160mm. With different kinds of designs meet different customers' markets request. For more details please check our products list.
Regarding to Ppr fittings Brass inserts,we accept common brass, CW617N,DZR,Stainless Steel and so on.

Pex Pipe and Brass Fittings: which include Pex-b Pipe, Pex-Al-Pex Pipes,brass fittings, Such as Pex Fittings, Press Fittings, Compression fittings,Hose pipe fittings, Flare fittings, Solder fittings,etc.

Brass Valves:which includes Angle Valves, Gate Valve, Ball valves, Check Valves, lock valves, Bibcocks, Water tank faucets, Washroom facets.

Brass Accessories: such as Brass inserts, Brass male&female Unions,Brass Ball, Brass Valve cartridges.

Main of our products are exporting to worldwide markets range,including European countries such as Germany, Italy, France,Holland, Austria, North American Market such as America,Mexico,Columbia and so on. Middle East Markets such as Saudi Arabia, UAE, Jordan, Qatar, Bahrain, Lebanon, Oman and so on.Asian Countries such as Thailand, Vietnam, Singapore, The Philippines,Cambodia and South America such as Brazil, Argentina, Chile,Uruguay, Bolivia, Ecuador and so on. All of the products have enjoyed favorable reputation through high quality products and satisfied service with reasonable & competitive prices.

DSTHERM Agent is warm welcomed!
OEM&ODM Customers are accepted too.
Welcome to cooperate with us, we will be always on your side.
DSTHERM, Love Water, Enjoy Life!